SPECIFICATIONS
PowerTrain | ||
---|---|---|
Engine | ||
Model | OM 926 | |
Maximum Power, kW | 210 kW @ 2200 rpm | |
Maximum Torque, Nm | 1100 Nm @ 1200 - 1600 rpm | |
No. of Cylinders, Displacement (CC) | June 1, 7200 | |
Emission Compliance | Bharat Stage VI | |
Gearbox | ||
Gearbox Model & Type | G 131, 9F+1R, Mechanical, Synchromesh Gears | |
Clutch Type | Single Dry Plate, Hydraulic Control | |
Clutch Diameter (mm) | 430, 4.5 mm High Wear | |
Axle | ||
Front Axle Model, Type | IF 7.0 | |
Rear Axle Model, Type | MT36 610 (Hub Reduction) | |
Rear Axle Ratio* | 4.55 | |
Dimensions (mm): All Dimensions are for CBC | ||
Wheel Base (mm): | 3600 | |
Loading Span (ft)/ Loadbody cpc (Cu.m): | NA | |
Overall Length (mm): | 6063 | |
Overall Width (mm): | 2490 | |
Overall Height (mm) (CBC): | 2975 | |
Front Overhang (mm): | 1485 | |
Rear Overhang (mm): | 978 | |
Minimum Ground Clearance (mm): | 304 | |
Weight | ||
Gross Combination Weight | (with Suitable Three Axle Trailer – greater than 3m non-tridem spacing & mechanical suspension on all trailer axles) Radial (11R20) & Tubeless, 295/90R20 Tyres - 49,960 kgs & 50,000 kgs | |
Chassis Frame, Suspension & Tyres | ||
Frame Section (DxWxT) (mm) | 288 x 70 x 9 | |
Front Suspension | Parabolic Type Leaf Spring with 2 Hydraulic Shock Absorbers | |
Rear Suspension | Semi-Elliptical Leaf Spring | |
Anti Roll Bar | Standard on both Axles ( PTO Variants) | |
Brakes & Tyres | ||
Service Brake | Pneumatic, Foot Operated, Dual Line with ABS | |
Parking Brake | Pneumatically Operated Hand Control Valve | |
Front Axle Brake | Ø 410 drum | |
Rear Axle Brake | Ø 410 drum | |
Tyre Size | Radial Tyres (11R20 & 295/90R20 Tubeless Tyres (295/80R22.5) | |
Steering & Cabin | ||
Steering Type | Hydraulic Power Assisted | |
Cabin: | Sleeper | |
Fuel Tank & Electricals | ||
Fuel Tank/ Filling Capacity | 455L/ 430L | |
Adblue Tank/ Filling Capacity | 60L/ 51L | |
Voltage | 24V | |
Battery Capacity | 120Ah | |
Performance | ||
Maximum Gradeability % | 0.243 | |
Maximum Geared Speed | 80 kmph | |
Turning Circle Diameter (TCD)* | 13.1 m |